Mantus M2 Galvanized Anchor 65lb/30kg

$1,695.98

Available on back-order

Galvanised Steel
For use as:
Day Anchor <30 kn, 40-50 ft boat
Cruising Anchor <50 kn, 43-45 ft boat Storm Anchor >50 kn, 38-53 ft boat
Want to learn more? 

Available on back-order

Description

M2 65 lbs/30 kg MANTUS ANCHOR IS BUILT STRONG

  • Designed to fit boats with bow sprits and bow pulpits.
  • Formed out of high-quality steel plate and high end precision casting.
  • ASTM certified bolts are oversized with a large margin to ensure safety.
  • Although the bolt used in the assembly is load bearing, only a fraction of the load is transmitted to the bolt.
  • Shank and roll bar are bolted to the fluke.
  • In the carbon steel version every part of the anchor system is hot-dipped galvanised for corrosion protection. (All shanks are HT ASTM 514 Steel and flukes are mild steel A36 equivalent)
  • Nose of the anchor is reinforced to guarantee a lifetime longevity.

Points to consider when deciding which Mantus anchor is best for your use:

  • Both M1 and M2 anchors have an amazing setting and resetting ability.
  • Both M1 and M2 are excellent choices for a primary anchor. But each has its own small specific advantages.
  • Both M1 and M2 anchors roll over well in most bottom conditions and it is rare for a properly weighted anchor to end up upside down.
  • The M1 anchor due to its roll bar is better at rolling over in a really soft silty bottom.
  • The M2 Anchor is less likely to get plugged up with muddy weeds.
  • The M2 is less bulky as it does not have a roll bar.
  • The M2 anchor better fit for boats with bow pulpits with slotted anchor housing and bow sprits.

 

Additional information

Weight 34 kg
Dimensions 72 × 59 × 18 cm

You may also like…

Go to Top