M2 25 lbs/11 kg Mantus Anchor


In stock (can be backordered)

Galvanised Steel 
For use as:
Day Anchor (<30 kn, 30-35 ft)
Cruising Anchor (<50 kn, 25-30 ft) 
Storm Anchor (>60 kn, 20-25 ft)
Click for more information

In stock (can be backordered)



  • Designed to fit boats with bow sprits and bow pulpits.
  • Formed out of high-quality steel plate and high end precision casting.
  • ASTM certified bolts are oversized with a large margin to ensure safety.
  • Although the bolt used in the assembly is load bearing, only a fraction of the load is transmitted to the bolt.
  • Shank and roll bar are bolted to the fluke.
  • In the carbon steel version every part of the anchor system is hot-dipped galvanised for corrosion protection. (All shanks are HT ASTM 514 Steel and flukes are mild steel A36 equivalent)
  • Nose of the anchor is reinforced to guarantee a lifetime longevity.

Points to consider when deciding which Mantus anchor is best for your use:

  • Both M1 and M2 anchors have an amazing setting and resetting ability.
  • Both M1 and M2 are excellent choices for a primary anchor. But each has its own small specific advantages. 
  • Both M1 and M2 anchors roll over well in most bottom conditions and it is rare for a properly weighted anchor to end up upside down.
  • The M1 anchor due to its roll bar is better at rolling over in a really soft silty bottom. 
  • The M2 Anchor is less likely to get plugged up with muddy weeds.
  • The M2 is less bulky as it does not have a roll bar.
  • The M2 anchor better fit for boats with bow pulpits with slotted anchor housing and bow sprits.


Additional information

Weight 14 kg
Dimensions 53 × 43 × 13 cm


Go to Top